Spaceway
Project
Network:
  • Orbital Designs
  • Currrent:
  • News
  • Download
  • Discussion Forum
  • Project info:
  • About Spaceway
  • FAQ and controls
  • Add-on making
  • Vessels
  • Screenshots
  •       Flight and walk controls

    Thrust

    Orientation

    Transposition

    Ground


      Controls - Vessel controls

    The sum of the controls:


     

      Controls - Thrust

    There can be three engines on a vessel.

    Mains, pushing forward:


    Braking, pushing back:


    And hover, pushing up:


    Main engines are controlled by the light blue numpad + button.
    Braking engines are controled by the pink numpad - button.
    Hover engines are controlled by the yellow numpad ins button.

    Pushing any of these buttons would put the corresponding engine at full power.
    To fine tune the power, use the same keys while holding Ctrl key.
    Ctrl+braking reduces main thrust and vice versa.
    Ctrl+numpad del(orange) reduces hover thrust.

    For quick stop of all engines use the violet numpad * button.
    For a quick stop of hover engines press the orange numpad del button.

    Num Lock should be off for any of these to work.

     

      Controls - Orientation

    Red Numpad 8 and 2 controls pitch:


    Blue Numpad 4 and 6 controls roll:


    Green Numpad 1 and 3 controls yaw:


     

      Controls - Transposition controls

    The sum of the controls:


    The orientation and transposition modes are toggled by the light blue numpad / button

    There are three pairs of thrusters:
    Left and right, green numpad 1 and 3 keys.
    Up and down, red numpad 8 and 2 keys.
    Forwards and backwards, blue numpad 6 and 9 keys.

     

      Controls - Ground controls

    The sum of the controls:


    The ground and other modes are toggled by the light blue numpad / button

    Turning left and right is by the green numpad 1 and 3 keys.
    Moving forwards and backwards by the blue numpad 8 and 2 keys.
    Starfing left and right by the red numpad 4 and 6 keys.
    Jumping by the yellow numpad 0 button.

     

      
      ADSE 0.9.1   © 2005-2015,